Roofshield Cement Tile Primer
Water based, methyl methacrylate, adhesion promoted acrylic primer for application to cleaned cement tiles as the first coat of the Roofshield Tile Restoration Coating system
Roofshield Cement Tile Primer Facts:
DESCRIPTION:
Primer is the first coat of the Cement Tile Roof Coating System and is the ‘Key Coat’ which is the all-important adhesion coat. This anchors the roof coating system to the cleaned tile surface. It dries clear when applied and is suited to slightly worn tile surfaces. Cement tile primer also contains strong fungicide/algaecide to kill and prevent the growth of fungi spores which may be hidden deep within the tile surface.
Water based, methyl methacrylate, adhesion promoted acrylic primer for application to cleaned cement tiles as the first coat of the Tile Restoration Coating system. CEMENT TILE PRIMER is formulated to penetrate into the cleaned and prepared tile surface and seal and prepare the tile for the following colour coats of ROOF MEMBRANE.
CEMENT TILE PRIMER utilises powerful surface active agents and water miscible solvents to promote effective wetting and penetration into the cement tile surface to ensure long term adhesion of the entire coating system.
This primer also contains a strong fungicide / algaecide to kill and prevent growth of fungi spores which may be hidden deep within the tile surface.
SURFACE PREPARATION
Refer to suggested Work Procedures for Cement Tile Roofs.
Water blast and clean tiles using a 3,000psi machine. Ensure all dirt, fungus, and other deposits are fully removed. Ensure loose and degraded old tile surface is removed. Pay attention to effective cleaning of the noses of tiles taking care not to force water up under tiles on to ceilings or soffits. (Lower power machines are considered ineffective in removing loose tile surface and are not recommended)
Previously Painted Surfaces
Not applicable
Application
Apply by airless spray in a single wet penetrating coat.
OTHER INFORMATION
Stir before use. Surface must be dry before application. Do not apply at surface temperatures below 10 degrees Celsius.
SDS (Safety Data Sheet) and PDS (Product Data Sheet):
Product Data Sheet (PDS), provides detailed information about the product. It describes the product, detailing its purpose, application methods, surface preparation, environmental and health safety measures, and recommended storage conditions.
Material Safety Data Sheet (SDS), outlines the safety aspects of the same product. It includes emergency contact information, a detailed breakdown of the chemical components and their proportions, physical and chemical properties, potential health risks, first aid measures, precautionary measures for handling and use, and detailed protocols for dealing with spills, exposure, and fires involving the product.